BC Biomedical IPA-2000S Instrukcja Użytkownika Pobierz pdf (Strona 73)

2-41

Alarms that are silenced but still present can be viewed from

the Main Screen. Press to scroll through alarms from

the Main Screen. The first line of the alarm displays the device

for which the alarm sounded (Channel 1, Channel 2, Safety

Analyzer, System). The second line displays the specific

alarm message.

IPA-2000S

CHANNEL 1

STOPPED-BUBBLE FOUND

ALARMSALARMS

ALARMS

ALARM OVERVIEW

A special feature is incorporated to automatically scroll through

active alarms in the Main Screen. The ALARM SCAN

parameter in the USER SETUP determines the rate at which

active alarms are automatically scrolled in the Main Screen.

(See USER SETUP for details.)

BUBBLE RECOVERY NOTE:

CWhen bubbles are detected in the system, an automatic bubble recovery routine

will attempt to clear them. The display will indicate that the system is in the

Bubble Recovery Mode. Allow the fluid to continue to flow during this process.

When the bubbles are cleared, it is advisable to run a short test to insure proper

operation.

CIn most cases, it is better to simply Purge and Prime again (See PURGING

and PRIMING for details), being certain that no bubbles get into the unit. This

will insure maximum accuracy and reliability.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 161 162

Brak uwag

BC Biomedical IPA-2000S Instrukcja Użytkownika Strona 73